IIT Bombay JRF and SRE Openings 2011 - IIT Bombay job 2011 - IIT Bombay job openings 2011 - IIT Bombay jobs 2011 - IIT Bombay Recruitment 2011

For more details visit:

http://epaper.timesofindia.com/Repository/ml.asp?Ref=VE9JTS8yMDExLzAyLzAyI0FkMDUyMDg=&Mode=G&Locale=english-skin-custom

Courtesy: Times Of India

Powergrid Executive Trainee Jobs 2011 - Powergrid job openings 2011 - Powergrid jobs 2011 - Powergrid Recruitment 2011 - Powergrid Recruits Executive Trainee - Powergrid Jobs for Electrical stream 2011 - Freshers jobs in Powergrid Corporation Of Indi

For more details visit:

www.powergridindia.com

Weatherford Jobs 2011 - Weatherford Jobs - Weatherford Engineered Systems Support Jobs 2011 - Weatherford Job Openings 2011

For more details visit:

http://epaper.timesofindia.com/Repository/ml.asp?Ref=VE9JTS8yMDExLzAyLzAyI0FkMDQ1MDY=&Mode=G&Locale=english-skin-custom

Courtesy: Times of India

Tech Mahindra Jobs 2011 - Tech Mahindra Job Openingd 2011 - Tech Mahindra Jobs for experienced - Tech Mahindra Walkin Interview 2011 - Weekend interview Feb 2011 - Walkin Interview Feb 2011

For more details visit:

http://epaper.timesofindia.com/Repository/ml.asp?Ref=VE9JUFUvMjAxMS8wMi8wMiNBZDAzMTA3&Mode=G&Locale=english-skin-custom

Centre for Personnel Talent Management (CEPTAM) Syllabus 2011 - DRDO CEPTAM Syllabus 2011 - DRDO CEPTAM Exam Pattern - CEPTAM Syllabus 2011 - CEPTAM Exam Pattern Paper -Syllabus,Scheme of Written Examination CEPTAM

Syllabus / Scheme of Written Examination:

Duration: 2 hours

Questions: 150 (multiple choice objective type)

A) For STA ‘B’ & Technician ‘A’:

The written test will consist of

(i) 30 questions on General Awareness, General Intelligence & Reasoning Ability and

(ii) 120 Questions on Subject concerned

B) Admin & Allied Cadre:

For Post of Personal Asstt., Admin Asstt., Store Asstt., Canteen Manager, Fire Engine Driver, Fireman, Cook, the written test will consist of

(i) 100 Questions on General Awareness, General Reasoning, Arithmetic and Numerical Ability & Trade related question, if applicable

(ii) 50 Questions on Hindi or English language.

C) Asstt Hindi:

The written test will consist of

(i) 50 Questions on General Awareness, General Intelligence & Reasoning, and Numerical Ability and

(ii)100 Questions on Hindi & English Language.

Level of Syllabus:

The syllabus of the examination will be based on the minimum essential qualification of the post as per advertisement and recruitment rules.

 

K.C.Mahindra Scholarship - Scholarship for Post Graduates - Scholarship for PG students - Scholarship for Students - K.C.Mahindra Scholarship for PG students

For more details visit:

http://epaper.timesofindia.com/Repository/ml.asp?Ref=VE9JQ0gvMjAxMS8wMS8yOCNBZDAwNzA4&Mode=G&Locale=english-skin-custom

Courtesy: Times of India

BEML job Openings 2011 - BEML jobs 2011 - BEML Engineer Trainee,Assistant Engineer Trainee & Management Trainee openings 2011 - BEML Recruitment 2011 - BEML Latest Jobs 2011 - BEML Vacancy 2011

BEML announced Engineer Trainee,Assistant Engineer Trainee & Management Trainee openings.

For more details and ONLINE Application :
http://www.bemlindia.com/job-advt25.php

Official website :
http://www.bemlindia.com

CSIR-SERC Chennai jobs 2011 - Council of Scientific and Industrial Research jobs 2011 - CSIR – SERC Scientist jobs 2011 - Scientist Job Openings 2011 - CSIR Scientist Job Openings - CSIR Chennai Jobs 2011 - CSIR Job Openings 2011

CSIR-SERC Chennai Announced Scientist Job Openings. For details please visit the following link

http://www.sercm.org:7778/pls/portal/docs/PAGE/SERC_WEBSITE/RECRUITMENT/ADVT2011%20-%20SE-1-2011.PDF

DRDO Jobs 2011 - DRDO Job Openings 2011 - DRDO 2011 Jobs - DRDO Recruitment 2011 - DRDO CEPTAM recruitment 2011 - DRDO JRF Recruitment 2011 - DRDO Entry Test 2011 - DRDO Entry Test April 24 2011

DRDO Announced Various Jobs Openings.For details visit the link

http://www.drdo.gov.in/drdo/ceptam/Advertisement04.pdf

The tentative date of the written examination (known as the DRDO Entry Test – 2011) is April 24, 2011 (Sunday). According to the notification published by the DRDO, the closing date for receipt of applications is February 18, 2011 while the online registration will open till February 14, 2011.

L and T Infotech Sample Solved Paper - L and T Infotech Sample Paper 2011

L&T infotech Placement Paper and Sample Paper


1) What is a smith chart used for

2) How is impedance matching done and why do we need it (basically can talk about ideal power supply needing a low internal resistance and high load to function properly. so one stage of transistor amplifier has to have low o/p resistance and high i/p resistance for next stage- do look up all basic electronics) ( also about sinking high currents without damage)

3) Name all flipflops u know and working esp. master slave.

4) C programming - program to find how many 1's are present in an integer variable using bitwise operators. something about dynamic allocation, static functions, macros

5) c++ virtual functions

6) what types of control r there

7) QPSK

8) Though i did mention that i was most comfortable with digital systems, microprocessors, i was asked only one or 2 questions on this topic like what is program counter, stack operation, etc.

9) A lot about final year project.

10) All electives, and subjects mentioned in CV.

11) CV as in most companies, is inspected very carefully during interview. so be careful what u put there lest they ask u something u are not prepared for.

i am sorry i cant remember any other questions but i hope this gives u atleast a rough idea about what subjects to cover.

also ur written test marks are very important. the order in which they call the people also indicates where u stand so try and

compensate by doing well in interview if ur name is towards the end of the list. u would improve ur chances i believe.

hr interview was only for around 10 minutes, they call if u have cleared tech interview. they asked about what i had been doing for the past 6 months, my plans, how L&T would help me. why L&T etc. the proceedure in mumbai however was totally different I think. they had GD, and HR interview i hear was gruelling. ur GK(number of states in our country, number of lady CMs in India,etc.)

is tested thoroughly. The form that u are given to fill before the interview, is reqiured to be filled in your neatest handwriting I really think this is imp.) and do take a lot of trouble to write things that would put u in good light. lots of luck to all u chennai people trying for L&T Infotech. Though they have a 2 year bond, this company is really worth going for. Do hope this information helps you a bit.


THE PAPER IS IN TWO PARTS iN THE FIRST ONE THERE ARE 40 QUESTIONS OF VISUAL REASONING AND IN SECOND THERE ARE 50 QUESTIONS FROM MISCELLANEOUS 30,40 TOPICS Question paper is here:

Part 1:-> Psychometric test.

Easiest thing in the world. Eight figures with you having to predict the ninth. Just use some common sense and u r thru this test. A WORD OF CAUTION tho; plz. do not waste time on a question if u r not sure ,just come back later n then do it. (36questions- 40minutes.)

Part 2:-> Engineering syllabus based Technical Test

Some of the questions r a s follows:-

a) What is reverse engineering.

b) Octal of some binary number(comes to 165 in decimal after conversion).

c) A cobol prog with an integer array(I guess coz i did not have Cobol in my syllabus).

d) A problem on Depth first search(very simple).

e) Question on Grammar's frm Theory of computer science.

f) Something like Select the correct option when A Subset of(B Subset of(A Intersection B).if B is completely contained by A.

g) A question on memory(quite simple).

h) A couyple of questions on C(one on pointers).

We were given the topic "Do u think women make better managers?"A debatable topic , but we merely agreed with each other and no big problem with it.


--------------------------------------------------------------------------------

Papers -2

1.APM-arithemetic progression matrices 36 questions -40 minutes

2.computer basis -like OP,UNIX,cobol,....(only basic questions )-40 questions -30 minutes.,for all branches the pattern is samefor APM they gave a booklet author-j.v.raven(not sure )very easy even though those who didn't receive call letter after applying don't worry it will end in a walkin. computer questions ex:why goto statement must be avoided,function of engineering reversal, specification&design are related by (followed by venn diagram),some questions in pascal...two c program using while and for staements,


--------------------------------------------------------------------------------

The first part is entirely from this particular book. Look for it at the second hand book sellers.

They give you 40 mins for 36 questions."Advanced Progressive Matrices - JC Raven"

http://www.jcravenltd.com/productrpm.htm is the website about this book.

The second part is of 30 minutes and covers various (IMHO irrelevant) topics. Some more questions.

Remember all are multiple choice questions with either 4 or 5 options so you have at least a 20-25% chance of being right even if you are clueless. No negative marking.

1. what is an inode in unix?

2. small program in pascal to add a node to a linked list. (You have totell what the program does)

3. C strcmp program (You have to tell what the program does)

4. set of dos commands testing basic familiarity with dir, ren *.t?t, cd etc.

5. what is the order of binary search?

6. what is the order of strassens matrix multiplication?

7. you have to maintain the sorted order of integers and insert integers . which data structure would you use? (tree, list, queue, array?)

8. There are two lists of integers to be merged. Which method would you not use?

9. In an online database system when is data written to disk? (on pressing enter, when commit

or update is encountered, at end of data, all of the above) (was clueless! )

10. Small prolog function which prints 2345true. You need to tell output.

11. Convert this binary into octal. 010 100 101

12. Lisp program given. what does it do? (GCD, LCM, Multiplies mxn?)

13. What is paging?

14. what is segmentation?

15. 2/3 questions on equivalence class, associative and commutative properties.

16. question on poset.

17. one figure given, give regular expression for it (very basic)


--------------------------------------------------------------------------------

Sample Paper 2


1. a( [ B ( [A^ C]]

where '(' and '^' are symbols related to SET and '^' is not exact

symbol , it is curved not conical(due to limitation of

key board ), represents"union"

a. has no sense

b.It is associative as well as commutative

2.2's complement of given Binary number

3. Octal Equivalent of a Binary number


4.Given --

Ac + AB + BC =

a. AC

--

b. BC+AC

L and T Mechanical placement Paper 2011 - Mechanical Placement Paper 2011 - L and T Infotech Mechanical Paper 2011 - Solved Paper 2011 of L and T Infotech

SECTION-1
Mechanical aptitude

SET 1:
1. Stroboscope is used for measuring?
A. rpm of the spur gear.
B. temprature calibration.
C. velocity of the reciprocating engine.
d. All the above.
e. None of the above.
2. Pneumatic pressure for industrial application?

3. Lathe bed is made of CI because?

4. Carbon is added to steel-to increase hardness

5. Guideways are hardened by which hardening method?

6. Carbon is added to engine parts to enhance——– property.

7. A metal has K temp gradient and 2K for another metal. If a hot fluid is passed through a pipe the pipe should be made up of
a. K inside, 2K outside.
b. 2K inside, K outside.
c. Any of the above.
d. None of the above.

8. Crowning of pulley is done for?

9. If temp increases viscosity of gas &liquid

10. Shear angle in press tool -to avoid burr, easy shear.

11. Hardening of shear face in press tool is to

12. Blank size is equal to size of punch in presswork.

13. Bending moment diagram for a UDL in cantilever beam.
a. Parabola.
b. Triangle.
c. Rectangle.
14. for uniform strength of beam condition req.
a) Depth constant, width increases.
b) Depth increases, width decreases.
c) Both should be increases.
d) All the above.
e) None of the above.

15. M33*2 bolt size refers

16. For this bolt and nut arrangement what type is suitable
a.M6-6nos b.M8-4nos c.M10-2nos d.M12-1 .

17. Rupture stress is

18. If two springs of stiffness K1&K2is in series the equivalent stiffness is

19. Find out odd
a. Oxy-acety
b. Plasma arc
c. Electron beam
d. USM

20.butt welding
.
21.Welding employed for plastics

22.core prints

23.if carbon is added to petrol what happen

24.While machiningdoes not require lubricant.

25.Dirty filter is changed in to cleaner filter What will happen to the air fuel ratio –in the case of carburetor.

26.internal keyway is machined by

27.Aircraft blades are produced by
a. Casting
b. Stretch forming
c. Forging
d. Bending.

28.when water hammer occurs in the case of welding?why?

29.No of cranks used in 6 cylinder engine

30.Which grade of CI has most shock absorbing and damping capacity

31.damper is a vibration (dissipater).

32.Piezometer is used to measure
a)static pressure
b)total pressure
c)discharge]

33.which of the following is not a fusion welding
a) spot welding.
b) arc welding.
c) Electron beam welding
34.besides any thickness 2 metals of different materials can be butt welded by
a) by adjusting the initial gap.
b) By adjusting the current,voltage.
c) By adjusting the time of welding.

35.when pulley dia is doubled ,width is kept constant , tension is kept constant key size should be
a) Doubled in length.
b) Doubled in depth.
c) Both twice.

36.thermoplastics can be molded by
a) Vacuum molding
b) Compression molding
c) Injection molding

37.A ……..WEIGHT AT SLOPE
B—— WEIGHT THAT IS HANGING
FOR EQUILIBRIUM
a) A comes down
b) B comes down
c) A&B oscillates.
d) Remains at same.

38) Which load is safe for beam—————
a) Point load.
b) UDL locally.
c) UDL fully.
d) UVL.

39) For diesel engine which ratio is high?
a) Compression ratio.
b) Expansion ratio.

40) Washers are used for providing(bearing area).

41) Which has no differential(train).

42) Constituents of brass (alloy of copper and zinc).

43) Worm And worm wheels are used for— higher reduction.

44) Why in a condenser the pressure drops below vaccum turbine is tripped off(choice:c)

45) Fits will be based on –clerance between mating surface.

46)path traced by water particle flowing from an opening on the bottom of the container is —— Parabolic.

SET 2:

1) The path of jet discharging from bottom opening in a tank of water (parabola with its vertex at opening)

2)water hammer in pipes occur due to(heavy pressurisation of pipe)

3)specific speed of a pump(delivers unit discharge at unit head)

4)for small discharge at high pressure(reciprocating pump is preferred)

5)ultimate tensile stress of mild steel compared to ultimate compressive stress is(more)

6)rupture stress(load at breaking point/neck area)

7)moment diagram for cantilever beam carrying uniformly distributed load will be(parabolic)

8)moment of inertia of an area is always least with respect to(centroidal axis)

9)crowning on pulleys help(for automatic adjustment of belt position so that belt runs centrally)

10)mitre gears are same as (right angled bevel gears having same no.of teeth)

11)stress concentration is caused due to((d)all of above)

12)function of washer is(provide bearing area)

13)M33x2(metric threads of33mm O.D and 2mm pitch)

14)key used between shaft and pulley is made from(cold rolled mild steel bars)

15)hardness of steel depends on(shape7distribution of carbides in iron)

16)carbon steel is(an alloy of iron and carbon with varying quantities of Phosphorous&sulphur)

17)hardening of Machine tool guideways by(flame hardening)

18)carriage and tailstock are placed in(different guideways)

19)In welding,arc is too long due to(formation of globules in irregular pattern becoz of wandering of arc)

20)acetylene is stored in(liquid form)

21)purpose of riser is to(help feed casting until all solidification takes place)

22)core prints are used to(form set to support&hold core in place)

23)unlike materials as well as materials of different thickness can be butt welded by(control of presure&current)

24)galvanising is(process of coating of zn by hot dipping)

25)size of shaper is specified by(length of stroke)

26)hardness of wheel(or)grade of wheel refers to(strength of bond of wheel)

27)for grinding harder materials(softer grade is used)

28)dielectric medium in EDM is(kerosene)

29)electroplating requires(1)ac,2)dc,3)high frequency ac)

30)no cutting fluid is used in machining (C.I)

31)use of gap(snap)gauge

32)9.81 kgf=?newton

33)general gas eqn is(pv=mRT)

34)carnot cycle has max. efficiency for(reversible engine)

35)fuel-air ratio in a petrol engine fitted with suction carburettor,operating with dirty air filter as
compared to clean filter will be(higher)

36)In S.I engines ,air fuel ratio for idling speed is(1)lean,2)rich…)

37)use of piezometer

38)specific heat values for solid&liquid(one)

39)most ductile metal is(1)gold 2)steel 30C.I 4)Al)

40)aeroplane wings are made of

41)adv.of projection welding over spot welding

42)electrodes of resistance welding are made of(high strength&high conductivity)

43)AIRCRAFT GASTURBINE is made of(timken,haste&inconelalloys)

44)when a spring is cut into two,stiffness becomes

45)shear angle given in punch during piercing or punching operation is due to

46)worm gears used for(1)low redn speed 2)high rednspeed…)

47)helical gears are used(for noise redn)

48)mirror(image) is due to

49)hardest cutting tool material is(tungsten carbide)

50)fit is reqd due to(clearance between two mating parts)

51)damper is used for

52)Thickness(t=0.5cm)shear dis=7cm & tensiles tress=400kg/sq.cm find force reqd in punch?

SET 3:

1. Why CI is used for most m/c tools (dampening).

2. Which of the following does not require cooling medium (CI).

3. Among the following which is most used for vibration and dampening (GCI).

4. Which gear has no axial thrust (herring borne)?

5. Which has no differential (train).

6. When C is deposited on engine piston, what happens?

7. Constituents of brass (alloy of copper and zinc).

8. In a sheet metal blanking process the dia of the blank is equal to —–(dia of punch).

9. Fits will be based on (clearance bet mating parts).

10. C is added to a material why (to increase hardness).

11. Why in a condenser the pressure drops below vacuum turbine is tripped off (choice c).

12. Washers are used for providing (bearing area).

13. Constant enthalpy process (throttling).

14. Hardness of steel depends on (carbon).

15. If two springs of stiffness k1 and K2 is in series the equivalent stiffness is (k1+k2/k1k2).

16. Which one will have uniform strength (choice a) width same depth varying. b) Depth
same width varying. c) Width and depth vary proportionally. D) Any of the above. E) None of the above.

17. In a simple row 6 cylinder radial engine how many cranks will be there (1).

18. In which of the following work done is zero (all the above).
19. How internal keyway is made (broaching).

20. Screw threads are made (rolling).

21. In which instrument more measure is taken (outside micrometer).

22. Most common pressure range used for industrial applications (5 to 10 bar).

23. Worm gears are used for (high reduction ratios).

24. Ni is added to CI to increase …(toughness).

SECTION 2

Mechanical comprehension

Basically 4 types

1) asked to find the gear direction of rotation given the driver rotation

2) Minimum effort to lift the load given different types of mechanisms

3) Speed of the gear rotation

4) Water flowing from a channel
All were diagrammatic.
8-10 questions from pulleys, gears, and shafts.

SECTION 3
Non-verbal reasoning

These were for picture puzzles:

This part is the easiest of all. You can easily solve it in less than 30 minutes. Certain sequence of

8 pictures will be given and u will be asked to find the 9th one, u will have 8 choices.
You can easily solve the first 20-25 questions and others are little difficult.

GD topics:

1. Should Mangers Be Good Technical Personnel?
2. Indian Technical Professionals Wish To Merely Set Up A Career Abroad.
3. Are Indians Less Quality Conscious?
4. Brain drain.