Friday, January 29

DRDO Previous Year Question Papers

1.The current I in the given network.
a) 1A b) 3A c) 5A d) 7A
2.For the Delta- Wye transformation in given figure, the value of the resistance R is.
a) 1/3 ohms b) 2/3 ohms c) 3/2 ohms d) 3 ohms
3.In the given network, the Thevenin’s equivalent as seen by the load resistance Rl is
a) V=10 V, R= 2ohms b) V=10V, R=3 ohms c) V=15V, R= 2ohms d) V=15V, R=3 ohms
4.The current I in a series R-L circuit with R=10 ohms and L=20mH is given by i=2sin500t A. If v is the voltage across the R-L combination then i
a) lags v by 45 degree b) is in-phase with v c) leads v by 45 d) lags v by 90
5.In thr given network, the mesh current I and the input impedance seen by the 50 V source, respectively, are
a) 125/13 A and 11/8 ohms b) 150/13 A and 13/8 ohms c) 150/13 A and 11/8 ohms d) 125/13 A and 13/8 ohms
6.A voltage sourcehaving a source impedance Z = R + jX can deliver maximum Average power to a load impedance Z, when
a) Z = R + jX b) Z = R c) Z = jX d) Z = R –jX
7.In the given circuit, the switch S is closed at t=0. Assuming that there is no initial Charge in the capacitor, the current i(t) for t>0 is
a) V/R e^ (-2t/RC) b) V/R e^ (-t/RC) c) V/2R e^ (-2t/RC) d) V/2R e^ (-t/RC)
8.For the circuit in given figure, if e(t) is a ramp signal, the steady state value of the Output voltage v(t) is
a) 0 b) LC c) R/L d) RC
9.For the series RLC circuit in given figure, if w=1000 rad/sec, then the current I (in Amperes) is
a) 2 ∟-15 b) 2 ∟15 c) √2∟-15 d) √2∟15
10.The Y-parameter matrix (mA/V) of the two-port given network is
a) [2 -1 -1 2] b) [2 1 -1 2] c) [1 -2 -1 2] d) [2 1 1 2]
11.The maximum number of trees of the given graph is
a) 16 b) 25 c) 100 d) 125
12.Given figure shows a graph and one of its trees. Corresponding to the tree, the group of branches that CAN NOT constitute a fundamental cut set is
a) 1,2,3 b) 1,4,6,8,3 c) 5,6,8,3 d) 4,6,7,3
13.The Y-parameter matrix of a network is given by Y=[1 1 -1 1] A/V. The Z11 parameter of the same network is
a) ½ ohms b) 1/√2 ohms c) 1 ohms d) 2 ohms
14.For the given circuit, the switch was kept closed for a long time before opening it at t=0. The voltage v(0+) is
a) -10 V b) -1 V c) 0V d) 10 V
15.The input impedance of a series RLC circuit operating at frequency W=√2w, w being the resonant frequency, is
a) R-j(wL/√2) ohms b) R+j(wL/√2) ohms c) R-j√2wL ohms d) R-j√2wL ohms
16.The threshold voltage V is negative for
a) an n-channel enhancement MOSFET b) an n-channel depletion MOSFET c) an p-channel depletion MOSFET d) an p-channel JFET
17.At a given temperature, a semiconductor with intrinsic carrier concentration ni= 10 ^ 16 / m^3 is doped with a donor dopant of concentration Nd = 10 ^ 26 /m^3. Temperature remaining the same, the hole concentration in the doped semiconductor is
a) 10 ^ 26 /m^3 b) 10 ^ 16 /m^3 c) 10 ^ 14 /m^3 d) 10 ^ 6 /m^3}
18.At room temperature, the diffusion and drift constants for holes in a P-type semiconductor were measured to be Dp = 10 cm^2/s and µp = 1200 cm^2/V-s, respectively. If the diffusion constant of electrons in an N-type semiconductor at the same temperature is Dn = 20 cm^2/s, the drift constant for electrons in it is
a) µn = 2400 cm^2/V-s b) µn = 1200 cm^2/V-s c) µn = 1000 cm^2/V-s d) µn = 600 cm^2/V-s
19.A common LED is made up of
a) intrinsic semiconductor b) direct semiconductor c) degenerate semiconductor d) indirect semiconductor
20.When operating as a voltage regulator, the breakdown in a Zener diode occurs due to the
a) tunneling effect b) avalanche breakdown c) impact ionization d) excess heating of the junction.
21.If the common base DC current gain of a BJT is 0.98, its common emitter DC current gain is
a) 51 b) 49 c) 1 d) 0.02
22.Negative resistance characteristics is exhibited by a
a) Zener diode b) Schottky diode c) photo diode d) Tunnel diode
23.Let En and Ep, respectively, represent the effective Fermi levels for electrons and holes during current conduction in a semiconductor. For lasing to occur in a P-N junction of band-gap energy 1.2 eV, (En - Ep) should be
a) greater than 1.2eV b) less than 1.2eV c) equal to 1.1eV d) equal to 0.7eV
24.In a P-well fabrication process, the substrate is
a) N-type semiconductor and is used to build P-channel MOSFET
b) P-type semiconductor and is used to build P-channel MOSFET
c) N-type semiconductor and is used to build N-channel MOSFET
d) P-type semiconductor and is used to build N-channel MOSFET
25.In a MOS capacitor with n-type silicon substrate, the Fermi potential ¢ = -0.41 V and the flat-band voltage Vfb = 0V. The value of the threshold voltage Vt is
a) -0.82 V b) -0.41 V c) 0.41 V d) 0.82
Refer given figure for question 26 and 27. Assume D1 and D2 to be ideal diodes.
26.Which one of the following statements is true?
a) Both D1 and D2 are ON.
b) Both D1 and D2 are OFF.
c) D1 is ON and D2 is OFF.
d) D2 is ON and D1 is OFF.
27.Values of Vo and I, respectively, are
a) 2V and 1.1 mA b) 0V and 0 mA c) -2V and 0.7 mA d) 4V and 1.3 mA
28.In a BJT CASCODE pair, a
a) common emitter follows a common base
b) common base follows a common collector
c) common collector follows a common base
d) common base follows a common emitter
29.Inside a 741 op-amp, the last functional block is a
a) differential amplifier b) level shifter c) class-A power amplifier d) class-AB power amplifier
30.For the MOSFET in the given circuit, the threshold voltage Vt = 0.5V, the process parameter KP = 150 µA/V^2 and W/L = 10. The values of Vd and Id, respectively, are
a) Vd = 4.5 V and Id = 1 mA
b) Vd = 4.5 V and Id = 0.5 mA
c) Vd = 4.8 V and Id = 0.4 mA
d) Vd = 6 V and Id = 0 mA
31.A negative feedback is applied to an amplifier with the feedback voltage proportional to the output current. This feedback increases the
a) input impedance of the amplifier b) output impedance of the amplifier c) distortion in the amplifier d) gain of the amplifier
32.The early effect in a BJT is modeled by the small signal parameter
a) r0 b) r∏ c) gm d) β
33.For a given filter order, which one of the following type of filters has the least amount of ripple both in pass-band and stop-band?
a) Chebyshev type I b) Bessel c) Chebyshev type II d) Elliptic
34.For a practical feedback circuit to have sustained oscillation, the most appropriate value of the loop gain T is
a) 1 b) -1 c) -1.02 d) 1.02
35.Assume the op-amps in given figure to be ideal. If the input signal vi is a sinusoid of 2V peak-to-peak and with zero DC component, the output signal vo is a
a) sine wave b) square wave c) pulse train d) triangular wave
36.In a common source amplifier, the mid-band voltage gain is 40 dB and the upper cutoff frequency is 150kHz. Assuming single pole approximation for the amplifier the unity gain frequency fT is
a) 6 MHz b) 15 MHz c) 150 MHz d) 1.5 GHz
37.An op-amp is ideal except for finite gain and CMRR. Given the open loop differential gain Ad=2000, CMRR = 1000, the input to the noninverting terminal is 5.002 V and the input to the inverting terminal is 4.999 V, the output voltage of the op-amp is
a) 14 V b) 24 V c) -6 V c) -8 V
38.The op-amp in the circuit in given figure has a non-zero DC offset. The steady state value of the output voltage Vo is
a) –RC dvs(t)/ dt b) – (1/RC)|vs(t)dt c) –V d) +V
39.For the circuit in given figure, if the value of the capacitor C is doubled, the duty-cycle of the output waveform Vo
a) increases by a factor of 2 b) increases by a factor of 1.44 c) remains constant d) decreases by a factor of 1.44
40.Assume the op-amp in the given circuit to be ideal. The value of the output voltage Vo is
a) 3.2 Vi b) 4 Vi c) 9 Vi d) 10 Vi
41.The complement of the Boolean expression F = (X + Y¯ + Z)(X¯ + Z¯)(X + Y) is
a) XYZ+XZ¯+Y¯Z b) X¯YZ¯+XZ+X¯Y¯ c) X¯YZ¯+XZ+YZ d) XYZ+X¯Y¯
42.The Boolean function F(A,B,C,D) = ∑(0,6,8,13,14) with don’t care conditions d(A,B,C,D) = ∑(2,4,10) can be simplified to
a) F = B¯D¯+CD¯+ABC¯ b) F = B¯D¯+CD¯+ABC¯D c) F = AB¯D¯+CD¯+ABC¯ d) F = B¯D¯+CD¯+ABCD
43.The Boolean function F = A¯D¯+B¯D can be realized by one of the following figures
44. For the multiplexer in given figure, the Boolean expression for the output Y is
a) A¯B¯+B¯C¯+AC b) AB¯+B¯C¯+AC¯ c) AB¯+B¯C+AC d) A¯B¯+B¯C+A¯C
45. Which one of the following is TRUE?
a) Both latch and flip-flop are edge triggered.
b) A latch is level triggered and a flip-flop is edge triggered.
c) A latch is edge triggered and a flip-flop is level triggered.
d) Both latch and flip-flop are level triggered.
46. In a schottky TTL gate, the Schottky diode
e) increases the propagation delay
f) increases the power consumption
g) prevents saturation of the output transistor
h) keeps the transistor in cutoff region
47. For which one of the following ultraviolet light is used to erase the stored contents
a) PROM b) EPROM c) EEPROM d) PLA
48. Which one of the following is NOT a synchronous counter
a) Johnson counter b) Ring counter c) Ripple counter d) Up-down counter
49. In 8085 microprocessor, the accumulator is a
a) 4 bit register b) 8 bit register c) 16 bit register d) 32 bit register
50. In the register indirect addressing mode of 8085 microprocessor, data is stored
a) at the address contained in the register pair
b) in the register pair
c) in the accumulator
d) in a fixed location of the memory
51. The output w[n] of the system shown in given figure is
a) x[n] b) x[n-1] c) x[n] – x[n-1] d) 0.5(x[n-1] + x[n])
52. Which one of the following is a periodic signal
a) x(t) = 2 e^j(t+(π/4)) b) x[n] = u[n] + u[-n] c) x[n] = ∑{∂[n-4k]-∂[n-1-4k]} where k = -∞to ∞ d) x(t) = e^ (-1+j)t
53. If the input-output relation of a system is y(t) = ∫x(t) dt where t = -∞ to 2t
a) linear, time-invariant and unstable
b) linear, non-causal and unstable
c) linear, causal and time invariant
d) non-causal, time invariant and unstable
54. Which one of the can be the magnitude of the transfer function | H(jw) | of a causal system
55. Consider the function H(jw) = H1(w) + jH2(w), where H1(w) is an odd function and H2(w) is an even function. The inverse Fourier transform of H(jw) is
a) a real and odd function
b) a complex function
c) a purely imaginary function
d) a purely imaginary and odd function
56. The laplace transform of given signal is
a) –A((1-e^cs)/s) b) A((1-e^cs)/s) c) A((1-e^-cs)/s) d) –A((1-e^-cs)/s)
57. If X(z) is the z-transform of x[n] = (1/2)^ |n|, the ROC of X(z) is
a) |z| > 2 b) |z| < 2 c) 0.5<|z|<2 d) the entire z-plane
58. In a linear phase system, τg the group delay and τp the phase delay are
a) constant and equal to each other b) τg is a constant and τp is proportional to w c) a constant and τg is proportional to w d) τg is proportional to w and τp is proportional to w
59. A signal m(t), band-limited to a maximum frequency of 20 kHz is sampled at a frequency fs kHz to generate s(t). An ideal low pass filter having cut-off frequency 37 kHz is used to reconstruct m(t) from s(t). The maximum value of fs required to reconstruct m(t) without distortion is
a) 20 kHz b) 40kHz c) 57 kHz d) 77 kHz
60. If the signal x(t) shown in given figure is fed to an LTI system having impulse response h(t) as shown in given figure, the value of the DC component present in the output y(t) is
a) 1 b) 2 c) 3 d) 4
61. The characteristic equation of an LTI system is given as s^3 + Ks^2 + 5s + 10. When the system is marginally stable, the value of K and the sustained oscillation frequency w, respectively, are
a) 2 and 5 b) 0.5 and √5 c) 0.5 and 5 d) 2 and √5
62. The time required for the response of a linear time-variant system to reach half the final value for the first time is
a) delay time b) peak time c) rise time d) decay time
63. The signal flow graph of the given network is
64. Let c(t) be the unit step response of a system with transfer function K(s+a)/(s+K). If c(0+)=2 and c(∞)=10, then the values of a and K, respectively, are
a) 2 and 10 b) -2 and 10 c) 10 and 2 d) 2 and -10
65. The loop transfer function of an LTI system is G(s)H(s)= K(s+1)(s+5) / s(s+2)(s+3). For K>0, the point on the real axis that DOES NOT belong to the root locus of the system is
a) -0.5 b) -2.5 c) -3.5 d) -5.5
66. The state space equation of the circuit shown in given figure for x1=v0, x2=I is
67. The open loop gain of a unity feedback system is G(s)=wn^2 / s(s+2wn). The unit step response c(t) of the system is
69. The angles of the asymptotes of the root loci of the equation s^3 + 5s^2 + (K+2)s + K = 0, for 0<=K<∞, are a) 0 and 270 b) 0 and 180 c) 90 and 270 d) 90 and 180 
70. The bode plot corresponding to a proportional derivative controller is the one shown in given figure 
71. In frequency modulation, the instantaneous a) amplitude of the carrier signal is varied with the instantaneous amplitude of the message signal b) amplitude of the carrier signal is varied with the instantaneous frequency of the message signal c) frequency of the carrier signal is varied with the instantaneous amplitude of the message signal d) frequency of the carrier signal is varied with the instantaneous frequency of the message signal
72. If X is a zero mean Gaussian random variable, then P{X<=0} is a) 0 b) 0.25 c) 0.5 d) 1 
73. If a single-tone amplitude modulated signal at a modulation depth of 100% transmits a total power of 15W, the power in the carrier component is a) 5W b) 10W c) 12W d) 15W 
74. In a superheterodyne receiver, rejection of the image signal can be achieved by using a a) higher local oscillatorn frequency b) crystal oscillator c) narrow band IF filter d) narrow band filter at RF stage 
75. The number of bbits per sample of a PCM system depends upon the a) sampler type b) quantizer type c) number of levels of the quantizer d) sampling rate 
76. Which one of the following is used for the detection of AM-DSB-SC signal a) Ratio detector b) Foster-Seeley discriminator c) Product demodulator d) Balanced-slpoe detector 
77. Which one of the following signal pairs can represent a BPSK signal a) A cos2πfct, A sinπfct b) A cos2πfct, - A sinπfct c) - A cos2πfct, A sinπfct d) A sin2πfct, A cosπfct
78. Which one of the following can be used for the detection of the noncoherent BPSK signal a) matched filter b) phase-locked loop c) envelope detector d) product demodulator 
79. Bits of duration Tb are to be transmitted using a BPSK modulation with a carrier of frequency Fc Hz. The power spectral density of the transmitted signal has the first null at the normalized frequency a) |F – Fc|Tb = 0 b) |F – Fc|Tb = 1 c) |F – Fc|Tb = 2 d) |F – Fc|Tb = 4 
80. The probability of bit error of a BPSK modulation scheme, with transmitted signal energy per bit Eb, in an additive white Gaussian noise channel having one-sided power spectral density N0, is a) (1/2) erfc(Eb/2N0) b) (1/2) erfc√(Eb/2N0) c) (1/2) erfc(Eb/N0) d) (1/2) erfc√ (Eb/N0) 
81. For a given transmitted pulse p(t), 0<=t<=T, the impulse response of a filter matched to the received signal is a) –p(t-T), 0<=t<=T b) –p(T-t), 0<=t<=T c) p(t-T), 0<=t<=T d) p(T-t), 0<=t<=T 
82. The multiple access communication scheme in which each user is allocated the full available channel spectrum for a specified duration of time is known as a) CDMA b) FDMA c) TDMA d) MC-CDMA 
83. GSM system uses TDMA with a) 32 users per channel b) 16 users per channel c) 8 users per channel d) 4 users per channel 
84. If Rx(τ) is the auto-correlation function of a zero-mean wide-sense stationary random process X, then which one of the following is NOT true? a) Rx(τ) = Rx(-τ) b) Rx(τ) = -Rx(-τ) c) σx^2 = Rx(0) d) |Rx(τ)| <=Rx(0)
85. If E denotes the expectation operator, then E[X-EX]^3 of a random variable X is a) EX^3 – E^3X b) EX^3 + 2E^3X – 3EX Ex^2 c) 3EX^3 – E^3X d) 2EX^3 + E^3X – 3EX EX^2 
86. A discrete memoryless source produces symbols m1,m2,m3 and m4 with probabilities 1/2, 1/4 , 1/8 and 1/8, respectively. The entropy of the source is a) ¼ b) 1 c) 7/4 d) 2 
87. A channel has a signal-to-noise ratio of 63 and bandwidth of 1200 Hz. The maximum data rate that can be sent through the channel with arbitrary low probability of error is a) 600 bps b) 1200 bps c) 4800 bps d) 7200 bps 
88. For the vectors A = X ax + Y ay and B = Z az, del . (A X B) is a) 0 b) 1 c) XZ d) YZ 
89. Which one of the following relations represents Strokes’ theorem (symbols have their usual meaning)? a) ∫s del X A.ds = 0 b) ∫L A.dl = ∫s del X A.ds c) ∫s A X dS = -∫v (del X A)dv d) ∫v del.Adv = ∫s A.ds 
90. Which one of the following relations is not correct (symbols have their usual meaning)? a) del X E = - ∂B/∂t b) del X H = J + ∂E/∂t c) del.D = ρv d) del.B = 0 
91. The electric field component of a uniform plane wave propagating in a lossless magnetic dielectric medium is given by E(t,z)=ax 5cos(10^9 t – 20/3 z)V/m. If η0 represents the intrinsic impedance of the free space, the corresponding magnetic field component is given by a) H(t,z)= ay 5/2 η0 cos(10^9t – 20/3 z)A/m b) H(t,z)= ay 10/ η0 cos(10^9t – 20/3 z)A/m c) H(t,z)= az 5/2 η0 cos(10^9t – 20/3 z)A/m d) H(t,z)= az 10/ η0 cos(10^9t – 20/3 z)A/m
92. The skin depth of a non-magnetic conducting material at 100 MHz is 0.15 mm. The distance which a plane wave of frequency 10 GHz travels in this material before its amplitude reduces by a factor of e^-1 is a) 0.0015 mm b) 0.015 mm c) 0.15 mm d) 1.5 mm 
93. A lossless transmission line has a characteristic impedance of 100 ohms and an inductance per unit length of 1 μH/m. If the line is operated at 1 GHz, the propagation constant β is a) 2π rad/m b) 20π/3 rad/m c) 20π rad/m d) 2π *10^5 rad/m 
94. When a load resistance Rl is connected to a lossless transmission line of characteristic impedance 75 ohms, it results in a VSWR of 2. The load resistance is a) 100 ohms b) 75√2 ohms c) 120 ohms d) 150 ohms 
95. A two-port network characterized by the S-parameter matrix, [S] = [0.3 L0 0.9 L90 0.9 L90 0.2 L0] Is a) both reciprocal and lossless b) reciprocal, but not lossless c) lossless, but not reciprocal d) neither reciprocal nor lossless
96. A lossless air filled rectangular waveguide has internal dimensions of a cm * b cm. If a=2b and the cutoff frequency of the TE02 mode is 12 GHz, the cutoff frequency of the dominant mode is a) 1 GHz b) 3 GHz c) 6 GHz d) 9 GHz 
97. A Hertzian dipole antenna is placed at the origin of a coordinate system and it is oriented along z-axis. In which one of the following planes the radiation pattern of the antenna has a circular shape? a) x=0 b) y=0 c) z=0 d) ø=45 
98. Which one of the following statements is not true? a) Antenna losses are taken into account in calculating its power gain b) For an antenna which does not dissipate any power, the directive gain and the power gain are equal c) Directivity of an antenna is the maximum value of its directive gain d) The directive gain of a Hertzian dipole is same in all direction 
99. The directivity of a half dipole antenna is a) 1.0 b) 1.5 c) 1.64 d) 2 
100. Which one of the following is not true for a step index optical fibre? a) It can support multiple modes b) HE11 mode is its lowest order mode c) The refractive index of the cladding is higher than that of the core d) At a given wavelength, single mode operation is possible by proper choice of core diameter, core and cladding refractive indices.


101. Sarnath is situated in the state of
a) MP b) Bihar c) Punjab d) UP
102. Green house effect is due to the increase of atmospheric
a) CO2 level b) SO2 level c) CO level d) N2 level
103. In the month of July, it is winter in
a) New York b) Beijing c) Sydney d) London
104. The chairman of the Planning commission of India is
a) The prime minister b) The vice-president c) The union finance minister d) The union commerce minister
105. The satellite launch vehicle that placed a number of satellites ito orbit in May 2008 is
a) PSLV-C7 b) PSLV-C8 c) PSLV-C9 d) PSLV-C10
106.DRDO was formed in
a) 1947 b) 1950 c) 1954 d) 1958
107. SAMYUKTA is developed for the use of
a) Navy b) Army c) Air force d) RAC
108. DARL 202 is a variety of
a) pea b) garlic c) capsicum d) tomato
109. TRISHUL is
a) a surface to surface battlefield missile
b) a quick reaction surface to air missile
c) an intermediate range ballistic missile
d) a supersonic cruise missile
110. HUMSA is a
a) sonar b) tank c) mine d) night vision device
111. The value of 1+2i / 3-4i + 2-I / 5i , where i^2 is -1, is
a) -5/2 b) 5/2 c) 2/5 d) -2/5
112. The particular solution of the differential equation d^2y/dx^2 + 2 dy/dx + 5y = 0 satisfying the conditions y(0)=0 and y’(0)=1 is
a) y=1/2 e^-x cos2x b) y=1/2 e^-x sin4x c) y=1/2 e^-x sin2x d) y=1/2 e^-x cos4x
113. For the vectors A=3i-2j+k and B=2i-k, the value of (A*B).A is
a) 0 b) 1 c) 2 d) 3
114. The orthogonal trajectory of the family of curves x^2-y^2 = a (where a is a constant) and passing through the point (1,1) is
a) y=-1/x b) y=1/x c) y=-x d) y=x
115. The value of the line integral ∫ y^2 dx + 2xydy over the curve x=accost, y=asint is
a) 0 b) 1 c) 2 d) 4
116. The n-th partial sum of the infinite series 1/1*2 + 1/2*3 + 1/3*4+……1/n*(n+1)……..
a) 1/n+1 b) n+2/n+1 c) n/n+1 d) n-1/n+1
117. The complex-valued function f(z)=e^z is analytic for
a) no z b) all z c) real z only d) imaginary z only
118. The inverse of the matrix [ cos A sin A
-sin A cos A] is
a) [ -cos A Sin A b) [cos A sin A} c) [cos A -sin A d) [cos A -sin A
sin A cos A] sin A -cos A] -sin A cos A] sin A cos A]
119. Consider the function f(x) defined as
F(x) = 3x-1, x<0
0, x=0
2x+5, x>0
In the following table, List I shows 4 expressions for limits of f(x) and List II indicates the values of the limits
List I List II
P.Lim x->2 f(x) 1. -1
Q.Lim x->0+ f(x) 2. 9
R.Lim x->0- f(x) 3. -10
S.Lim x->-3 f(x) 4. 5
The correct matches are
a) P-2,Q-4,R-1,S-3 B) P-2,Q-4,R-3,S-1 C) P-4,Q-2,R-1,S-3 D) P-4,Q-2,R-3,S-1
120. Two events A and B with probability 0.5 and 0.7, respectively, have joint probability of 0.4. The probability that neither A nor B happens is
a) 0.2 b) 0.4 c) 0.6 d) 0.8
121. Consider the differential equation
X^2 d^2/dx^2 + x dy/dx + (x^2 - 4)y = 0. The statement which is not true for it is
a) It is a linear second order ordinary differential equation
b) It can not be reduced to a differential equation with constant coefficients
c) X=0 is a regular singular point
d) It is a non-homogeneous second order ordinary differential equation
122. The sum of two numbers is 16 and the sum of their squares is a minimum. The two numbers are
a) 10,6 b) 9,7 c) 8,8 d) 5,11
123. The value of the definite integral 0∫(π/2)^(1/3) x^2 sin(x^3)dx is
a) -1/3 b) 0 c) 1 d) 1/3
124. A circle C2 is concentric with the circle C1 : x^2 + y^2 -4x +6y -12 =0 and has a radius twice that of C1. The equation of the circle C2 is
a) x^2 + y^2 -4x +6y -13 =0 b) x^2 + y^2 -4x +6y -87 =0 c) x^2 + y^2 -4x +6y -100 =0 d) x^2 + y^2 -4x +6y -88 =0
125. Consider the quadratic equation x^2 + px + q =0. If p and q are roots of the equation, the values of p and q are
a) p=0, q=0 only b) p=1, q=-2 only c) p=0, q=0 and p=1, q=-2 d) p=0, q=0 and p=-2, q=1
126. Consider the list of words: etiquette, accommodate, forty, exaggerate, continous, independent, receipt. The number of misspelt words are
a) 1 b) 2 c) 3 d) 4
127. Consider the following sentences
1. A few friends he has are all very rich.
2. Do not insult the weak.
3. The later of the two persons was more interesting.
4. All the informations were correct.
Out of these sentences, the grammatically correct sentence is
a) 1 b) 2 c) 3 d) 4
128. The appropriate auxiliary verb to fill in the blank of the sentence “Gandhi knew that he __ soon be jailed.”is
a) would b) will c) shall d) may
129. The number of missing punctuation marks in the sentence “Rajesh along with Amit went to the market.”is
a) 0 b) 1 c) 2 d) 3
130. The meaning of the word PLAGIARISM is
a) theft of public money b) theft of ideas c) belief in one god d) belief in many gods

132. ACROPHOBIA is the abnormal fear of
a) open spaces b) height c) fire d) water
133. The appropriate pair of prepositions to fill in the blank in the sentence “He was angry __ me, because my remarks were aimed __ him.”is
a) at,to b) with, at c) with, to d) at, for
134. The appropriate word(s) to fill up the blank in the sentence “ I remember __ voices in the middle of the night.”is (are)
a) hear b) to hear c) hearing d) heard
135. The passive voice form of the sentence “I have known him for a long time.”is
a) He is known to me for a long time.
b) He is known by me for a long time.
c) He has been known to me for a long time.
d) He has been known by me for a long time.
136. If kennel is to a dog, then __ is to a hen.
a) nest b) coop c) hole d) stable
137. If NATION is to 5236765, then NOTION is to
a) 573675 b) 563765 c) 576375 d) 557365
138. The next two numbers of the series 3,5,11,21 are
a) 34 and 52 b) 34 and 53 c) 35 and 52 d) 35 and 53
139. A, B and C are three places in India with longitudes 80E, 85 E and 90 E respectively. Which one of the following statements about the local times of the places is true?
a) Local time of C is ahead of that of B.
b) Local time of B is ahead of that of C.
c) Local time of A is ahead of that of C.
d) A, B and C all have the same local time.
140. In this question, notations +, / and * are used as follows
A + B means A is the husband of B.
A / B means A is the sister of B.
A * B means A is the son of B.
With these relations, the relationship
denoted by P / Q * R is
a) P is son of R
b) P is daughter of R
c) P is uncle of R
d) P is father of R
141. If DELHI is written as EDHIL, then PARIS is written as
a) APRIS b) SARIP c) SAPIR d) APISR
142. The number of prime numbers between 10 and 50 is
a) 10 b) 11 c) 12 d) 13
143. The odd one in the list : LAN, TCP/IP, HACKER and KILLER is
a) LAN b) TCP/IP c) KILLER d) HACKER
144. SAW is to carpenter as SCALPEL is to
a) surgeon b) mason c) plumber d) tailor

PACE Requires Software Engineers/Senior Software Engineers/Tech Leads

Pace is a leading developer of digital TV technologies for the global payTV industry. Our main focus is on creating intelligent and innovative products and services that allow our customers to grow their subscriber base and increase ARPU.

Pace creates intelligent and innovative products and services that fuel the development of digital TV. Pace has one of the world's most experienced specialist engineering teams working with top payTV operators and in retail markets around the world.

Our PVR (personal video recorder) technology allows viewers to control what they watch on TV - and when they watch it. Pace's range of satellite, cable and IPTV products is at the forefront of the global switch to HD (high definition) television

Position: Software Engineers/Senior Software Engineers/Tech Leads

Experience: 2 - 8yrs

Qualification: BE/B.Tech in CS/EEE/ECE

1.Experienced in real time embedded software development, preferably Set Top Box domain/Consumer Electronics domain
2.Good in STB software/system architecture and design
3.Expert in C/C++
4.Good Knowledge in Device driver development for MIPS32, MIPS64, ARM cores (Conexant, ST, Broadcom processors).
5.Linux Device Driver (Kernel / User)
6.Operating Systems: Linux / vxWorks / OS20 / uCos / Nucleus
7.Debug Environment / tools: Workbench, ARM
8.Developer Suite (ADS), GDB, ST20 Toolset
9.Knowledge in Middleware (OpenTV), Conditional Access System (NDS,NAGRA,IREDETO,CONAX)
10.Knowledge in Motorola Communications Protocols: USB, Ethernet, PSTN Modems, DOCSIS, HDMI, SATA, Fireware IEEE1394.
11.STB Technologies: DVB, MPEG2, MPEG4, PVR/DVR, HD-TV, Graphics/OSD, Audio/Video, IPTV
12.Experience in third party software integration.

To know more about us login to: www.pace.com

Thursday, January 28

VT Mega Job Fair

VT Mega Job Fair on 30th & 31st of January 2010.

Come Together, We will create "NO UNEMPLOYMENT" in India.


"VT Manpower Consultancy Services Private Limited" is one of India's largest "HR Solutions" company. VT Manpower is in progress from the year 2006, and has around 750 clients as our credit from all the major Industries. VT Manpower has conducted many Job Fairs in the past days and helped lot of Job Seeker to identify their Suitable Job. Now we conducting 2010's First VT Mega Job Fair. This is going to become the Most Successful Job Fair in 2010.

VT Manpower
Conducting
VT Mega JOB FAIR
Nandanam Government Arts College
Chennai on 30.01.2010 (Saturday) and 31.01.2010 (Sunday).
VT Mega Job Fair's Previous Records:

Apart from spot offers, by utilizing these Resumes, which are collected from the Fair, we have given more then 5000+ offers, in our various clients place. Mainly to the experienced candidates in various Industries.

Advantages and Benefits:
1. All the companies are having openings for both Freshers and experienced candidates.
2. VT Manpower gives you 75%* placement assurance.
3. If you have any idea to change your job or career, this is a perfect opportunity for you.
4. This will not waste your time and effort.
5. If you are having any idea to change your domain, you can attend this job fair.
6. Age limitation is 32 for all the openings.
7. Have minimum three offers in your dream company and take home your choice.

Our Participating Clients are having various vacancies:
Software Industry:

1. Software Fresher 2. Software Engineer

Recruitment Industry:

1. HR Executives(Fresher and Experience) 2. Team Leaders-Recruitment

ITES/BPO Industry:

Our Clients are having variable shift timings like:
1. Australian Shifts 2. US Shifts 3. UK Shifts 4. Day Shifts 5. Rotational Shifts

And having Various Service Process like:
1. In-Bound Process 2. Out-Bound Process 3. Surveys Process

Our Clients are having Jobs vacancies currently for International Process for:
1. Customer Support Executives - (Non-Voice) 2. Customer Support Executives - (Voice)
3. Technical Support Executives - (Non-Voice) 4. Technical Support Executives - (Voice)

And Domestic Process for:
1. Tamil Call Center Executives 2. Telugu Call Center Executives
3. Malayalam Call Center Executives 4. Kannada Call Center Executives
5. Customer Support Executives (Non-Voice) 6. Customer Support Executives (Voice)
7. Data Entry

BFSI Industry:

1. Junior Executive (Securities, Loans, Insurance)
2. Senior Executive (Securities, Loans, Insurance)
3. Assistant Manager (Securities, Loans, Insurance)
4. Manager (Securities, Loans, Insurance)
5. Sr. Manager (Securities, Loans, Insurance)
6. Branch Manager (Securities, Loans, Insurance)

Educational Industry:

1. Counselor 2. Sr. Counselors

To get the complete list of requirements please visit 
www.vtmanpower.com on 29th January,2010.


All Companies are having Fresher and Experienced Openings
Don't forget to bring minimum 15 Resumes for the Interview.

Registration:
Register in online to Avoid Queue @ 
 
www.vtmanpower.com.
JobFair Venue and Date:
Date: 30.01.2010 (Saturday) and 31.01.2010 (Sunday)

Venue:
Nandanam Government Arts College,
No : 329, Anna Salai, Nandanam, Chennai - 600035

Landmark: Nandanam Signal in Anna Salai (Mount Road)
Nearest Bus Stop : Nandanam Government Arts College or Nandanam Signal
Nearest Railway Station : West Mambalam (T.Nagar)

Call for Clarifications:

1. 044 - 64548801
2. 044 - 64548805
3. 044 - 64548796
4. 9941950444
5. 9941917444

Result - Technician Trainees (HAL-TAD, Kanpur)

Result - Technician Trainees (HAL-TAD, Kanpur)
The following candidates have been provisionally selected for the post of Technician Trainees (discipline-wise) based on their performance in the written test held on 10.05.2009, practical test held from 29.10.2009 to 08.11.2009 and subsequent interview held from 11.12.2009 to 23.12.2009.



Please visit http://www.hal-india.com/careersnew.asp for more details

Wednesday, January 27

BSNL JTO Previous Year Paper

When a piece of copper and another of germanium are cooled from room temperature to 800 K then the resistance of -
a) Each of them increases
b) Each of them decreases
c) Copper increases and germanium decreases
d) Copper decreases and germanium increases
Answer: d)
When a signal of 10 mV at 75 MHz is to be measured then which of the following instrument can be used -
a) VTVM
b)
Cathode ray oscilloscope
c) Moving iron voltmeter
d) Digital multimeter
Answer: b)
When a sample of germanium and silicon having same impurity density are kept at room temperature then ?
a) Both will have equal value of resistivity
b) Both will have equal value negative resistivity
c) Resistivity of germanium will be higher than that of silicon
d) Resistivity of silicon will be higher than that of germanium
Answer: d)
When an RC driving point impedance function has zeros at s= -2 and s=-5 then the admissible poles for the function would be ?
a) s = 0; s = -6
b) s = 0; s = -3
c) s = 0; s = -1
d) s = -3; s = -4
Answer: b)
For the n-type semiconductor with n = Np and p = , the hole concentration will fall below the intrinsic value because some of the holes ?
a) drop back to acceptor impurity states
b) drop to donor impurity states
c) Virtually leave the crystal
d) recombine with the electrons
Answer: d)
The location of lighting arrestor is ?
a)
Near the transformer
b) Near the circuit breaker
c) Away from the transformer
d) None
Time constant of an RC circuit increases if the value of the resistance is ?
a)
Increased
b) Decreased
c) Neither a nor b
d) Both a and b
Answer: a)
zis a method of ?
a) Counting pulses sent over long distances
b) Transmitting pictures from one place to another
c)
Transmitting information concerning a process over a distance
d) None
Answer: c)
When the gauge factor of a strain gauge is 2, stress is 1050 kg/cm2, Y = 2.1? 106 kg/cm2 and R is 100 ohms then the value of DR will be -
a) 2W
b) 3W
c) 4W
d) 1W
Answer: d)
As the drain voltage is increased for a junction FET in the pinch off region then the drain current ?
a) Becomes zero
b) Abruptly decreases
c) Abruptly increases
d) Remains constant
Answer: d)
11. One of the following, which is not a transducer in the true sense, is ?
a) Thermocouple
b) Piezoelectric pick up
c) Photo-Voltaic cell
d)
LCD
Answer: d)
When a transistor is required to match a 100W signal source with a high impedance output circuit then the connection that would be used is ?

a) Common base
b) Common collector
c) Common emitter
d) Emitter follower
Answer: a)
In a JFET gates are always ?
a) forward biased
b) reverse biased
c) unbiased
d) none
Answer: c)
The main factor which differentiate a DE MOSFET from an E only MOSFET is the absence of ?
a) insulated gate
b) electrons
c) channel
d) P-N junction
An SCR conducts appreciable current when ?
a) Anode and gate are both negative with respect to cathode
b) Anode and gate are both positive with respect to cathode
c) Anode is negative and gate is positive with respect to cathode
d) Gate is negative and anode is positive with respect to cathode
Silicon is not suitable for fabrication of light emitting diodes because it is -
a) An indirect band gap semiconductor
b)
A direct band gap semiconductor
c) A wide band gap semiconductor
d) A narrow band gap semiconductor
An average responding rectifier type electronic ac voltmeter has its scale calibrated in terms of the rms value of a sine wave, when a square wave voltage of peak magnitude 100V is measured using this voltmeter then the reading indicated by the meter, will be ?
a) 111V
b) 100V
c) 90.09V
d) 70.7V
Answer: b)
When a four terminal T network is inserted between a source and load resistance as shown in figure then the resistance seen by the source remain the same with or without the four terminal block when R is ?

a) 5W
b) 10 W
c) 15 W
d) 20 W
Answer: a)
In the ac bridge shown in the given figure, the value of Rx and Cx at balance will be

Answer:
Which one of the following conditions for Z parameters would hold for a two port network containing linear bilateral passive circuit elements ?
a) Z11 = Z22
b) Z12Z21 = Z11Z22
c) Z11Z12 = Z22Z21
d) Z12 = Z21
Answer: d)
When the transmission parameters of the following network are A = C = 1, B = 2 and D = 3 then the value of Zin is ?

Answer:
The value of G12 or v2/v1 for the circuit shown in the fig. is -

Answer:
The two port network of the fig. shown has open circuit impedance parameters given by matrix -

Answer:
While calculating Rth, constant current sources in the circuit are ?
a) replaced by opens
b) replaced by ?shorts?
c) treated in parallel with other voltage sources
d) converted into equivalent voltage sources
Answer: a)
Maxwell?s loop current method of solving electrical networks ?
a) uses branch currents
b) utilizes kirchhoff?s voltage law
c) is confined to single-loop circuits
d) is a network reduction method
Answer: b)
A transmission line of characteristic impedance Z0 = 50 ohms, phase velocity Vp = 2 x 108 m/s and length l = 1m is terminated by a load ZL= ( 30 ? j 40 ) ohms. The input impedance of the line for a frequency of 100 MHz will be
a)(30 + j40 ) ohms
b)( 30 ? j40 ) ohms
c)(50 + j40 ) ohms
d)(50 ? j40 ) ohms
Answer: b)
For an elliptically polarized wave incident on the interface of a dielectric at the Brewster angle then the reflected wave will be-
a) Elliptically polarized
b) Linearly polarized
c) Right circularly polarized
d) Left circularly polarized
Answer: b)
A yagi antenna has a driven antenna-
a) Only
b) With a reflector
c) With one or more directors
d) With a reflector and one or more directors
Answer: d)
The number of lobes on each side of a 3l resonant antenna is ?
a) 3
b) 6
c) 2
d) 1
Answer: b)
The electric field intensity of a Hertizian dipole at a remote point varies as -
Radiation resistance of a half wave folded dipole is -
a) 72 W
b) 144W
c) 288 W
d) 216W
Answer: 1/r
When a carrier wave is modulated at 100% it?s power is increased by -
a)100%
b)150 %
c)50%
d)0%
Answer: c)
On a clear sky day, the atmospheric radio noise is strongest -
a) During morning hours
b) Around mid-day
c) During nights
d) In the afternoon
Answer: c)
TV broadcasting system in India is as per CCIR -
a) System B
b) System I
c) System M
d) System X
Answer: b)
For the safety measurement of the internal resistance of a 25-0-25 mA meter, a laboratory multimeter whose sensitivity is equal to ?
a) 1k ohm/volt can be used
b) 10 k ohm/volt can be used
c) 100 k ohm/volt can be used
d) 200 k ohm/volt can be used
Answer: d)
In order to measure moisture in wood the most suitable method is ?
a) Electrical conduction
b) Electrical ? capacitive
c) Absorption of radiation
d) Equilirium- moisture vs humidity
Answer: a)
The flow rate of electrically conducting liquid without any suspended particle cannot be measured by ?
a) turbine flow meters
b) electromagnetic flow meters
c) ultrasonic flow meters
d) thermistor based heat loss flow meters
Answer: d)
The most useful transducer for displacement sensing with excellent sensitivity, linearity and resolution is ?
a) an incremental encoder
b) an abosolute encoder
c)
LVDT
d) a strain gauge
Answer: c)
When variable reluctance type tachometer has 150 teeth on the rotor & the counter records 13,500 pulses per second then the rotational speed will be?
a) 4800 rpm
b) 5400 rpm
c) 6000 rpm
d) 7200 rpm.
Answer: b)
41. On a voltage scale, zero dB m in a 600-ohm system could refer to ?
a) 1.732 V
b) 1.0 V
c) 0.7746 V
d) 0.5V
Answer: b)
One of the following devices which is required in addition in order to measure pressure using LVDT is-
a) strain gauge
b) pitot tube
c) Bourden tube
d) Rotameter
Answer: c)
It is required to measure temperature in the range of 13000 C to 15000 c) The most suitable thermocouple to be used as a transducer would be ?
a) chromel - constantan
b) Iron - constantan
c) chromel - alumel
d) platinum- rhodium
Answer: d)
In a CSI if frequency of output voltage is f Hz, then frequency of input voltage to CSI is-
a) f
b) 2 f
c) f/2
d) 3 f
Answer: b)
Identify the type of chipper in the given circuit

a) Type A chopper
b) Type B chopper
c) Type C chopper
d) Type D chopper
Answer: b)
Maximum value of charging resistance in an UJT is associated with-
a) peak point
b) valley point
c) any point between peak and valley
d) after the valley point
Answer: a)
Thyristor A has rated gate current of 2A and thyristor B a rated gate current of 100 mA-
a) A is a GTO and B is a conventional SCR
b) B is a GTO and A is a conventional SCR
c) B may operate as a transistor
d) none of the above
Answer: a)
In a 3 phase full converter, the output voltage during overlap is equal to-
a) zero
b) source voltage
c) source voltage minus the inductance drop
d) average value of the conducting phase voltages
Answer: d)
Mark old the correct statement for Cycloconverters-
a) step-down Cycloconverter (CC) works on natural commutation
b) step up CC requires no forced commutation
c) load commutated CC works on line commutation
d) none of the above
Answer: a)
In a 3 phase full converter if load current is I and ripple free, then average thyristor current is-
a)
b)
c)
d)
Answer: b)1/3(I)
In the RF amplifier stage cascade (CE-CB) amplifier is used because it gives-
a) Large voltage gain
b) Low output impedance
c) Large isolation between the input and the output
d) None of the above
Answer: c)
Silicon diode is less suited for low voltage rectifier operation because-
a) it can withstand high temperature
b) ensures low PIV of the diodes
c) ensures lower values of capacitance in the filter
d) reduces ripple content
Answer: a)
An amplifier of class A is that in which -
a) Base is biased to cut ? off
b) Ic flows most of the time
c) Ie flows all the time
d) Vc often raises to Vcc
Answer: c)
A transistor is in active region when-
a) IB = bIC
b) IC=bIB
c) IC=IE
d) IC=IB
Answer: a)
For coupling purposes in RF amplifier a buffer amplifier is used because it provides-
a) Maximum loading and minimum mismatch
b) Minimum loading and minimum mismatch
c) Maximum loading and maximum mismatch
d) Minimum loading and maximum mismatch
Answer: b)
A transistor has CE parameter as hie = 10kW, hre =20 x 10-4 , hse = 100, hoe = 25 ms. The hib for this transistor will be-
a) 100 W
b) 99.01 W
c) 5m W
d) 101kW
Answer: b)
An FM radio receiver is tuned to a 90.6 MHz broadcast station. It will receive an image frequency of -
a) 110 MHz
b) 112 Hz
c) 114 MHz
d) 120 MHz
Answer: b)
In the given fig RL is shorted out, then VCE will become-

a) OV
b) VCC ? IBRB
c) Equal to VCC
d) None of the above
Answer c)
See the circuit shown and choose the correct option ?

a) Only red will glow
b) Only green will glow
c) Both red and green will glow
d) Neither red nor green will glow
Answer: a)
A dc to dc converter having an efficiency of 80% is delivering 16W to a load) If the converter is generating an output of 200V from an input source of 20V, then the current drawn from the source will be ?
a) 0.1A
b) 0.5A
c) 1.0A
d) 10.0A
Answer: c)
A transistor is operated as a non-saturated switch to eliminate ?
a) storage time
b) turn ? off time
c) turn ? on time
d) delay time
Answer: b)
The output Y of the circuit in the given figure is ?

a) (A + B)C + DE
b) AB + C(D + E)
c) (A + B)C + D + E
d) (AB + C) . DE
Answer: a)
Rotors used in a two-phase ac servomotor is ?
a) solid iron motor
b) squirrel cage rotor
c) drag cup rotor
d) both b and c
Answer: d)
Major advantage of TWT over a klystron lies in its ?
a) higher bandwidth
b) higher output
c) higher frequency
d) higher gain
Answer: d)
The op-map circuit shown in the given figure can be used for ?

a) addition
b) subtraction
c) both addition and subtraction
d) multiplication
Answer: d)
The Boolean expression for the shaded area in the given Venn diagram is ?

Answer: AB+BC+CA
A lag compensator is basically a ?
a) high pass filter
b) band pass filter
c) low pass filter
d) band elimination filter
Answer: c)
Transfer function T (S) of the system in the given fig is-

Answer:
The overall transfer function for a unity feedback system is 4/(S2+4S+4) Mark the correct statement regarding this system
1. Position error constant kp for the system is 4
2. The system type one.
3. The velocity error constant kv for the system is finite.
Select the correct answer using the codes given below Codes
a) 1,2 and 3 b) 1 and 2 c) 2 and 3 d) 1 and 3
Answer: d)
If the rotor?s resistance and reactant?s are respectively R and X1 its length and diameter are L and D for two phase a) c) servomotor, then-
In a PID controllers the transfer function G(s) is-
Transfer function can be approximated by the system- The transfer function of an amplifier is given by The high 3 db frequency of an amplifier will be approximately-
a) 5850 kHz
b) 585 kHz
c) 5850 Hz
d) 585 Hz
Answer: X/R is small but L/D is large
The output signals amplitudes for 1?s and 0?s in an ADM transmission systems are ?

a) Fixed and the repetition rate is also fixed
b) Fixed but the repetition rate is variable
c) Variable and the repetition rate is also variable
d) Variable but the repetition rate is fixed
Answer: d)
Microwave link repeaters are typically 50km apart ?
a) Because of atmospheric attenuation
b) Because of Output tube power limitations
c)
Because of the earth?s curvature
d) To ensure that the applied ac voltage is not excessive
Answer: c)
The amplifier inserted at intervals to amplify the signal and compensate for transmission loss on the cable are called-
a) line amplifier
b) equalizing amplifiers
c) compradors
d) repeaters.
Answer: d)
Diversity reception in used to-
a) increase receiver sensitivity
b) improve receiver selectivity
c) overcome degrading effect of fading
d) overcome degrading effect of receiver detuning
Answer: c)
Mark out transferred electron device in the following-
a) BARITT dived
b) IMPATT dived
c) Gunn divde
d) Step recovery diode
Answer: c)
In the output of a normal monochrome receiver video detector voltages, which are not found, are -
a) syne
b) video
c) sweep
d) sound
Answer: c)
The HV anode supply for the picture tube of TV receiver is generated in the-
a) mains transformer
b) vertical output stage
c) horizontal output stage
d) horizontal deflection oscillator
Answer: c)
In antenna measurements using two aperture antennas of dimensions D1 and D2 , minimum separation between the two should be (x is free space wavelength of radiation uses) The frquency range for satellite broad casting is ?
Answer: (D12+D22)/x
The frquency range for satellite broad casting is
a) 30 MHz - 300MHz
b) 30 MHz - 3 GHz
c) 3 GHz - 30 GHz
d) 30 GHz - 300 GHz
Answer: c)
Iris is used to ?
a) Over come power loss
b) Over come bending effect
c) Over come mismatch error
d) Over come twist effect
Answer: c)
In schotty barrier diode current flows because of ?
a) Majority carriers
b) Minority carriers
c) Majority and minority carriers
d) None
Answer: b)
Which antennas are used in microwave communication ?
a) long wave antennas
b) Rhombic antennas
c) Parabolaidal antennas
d) All of above
Answer: c)
Among translator & time of sight system capacity ?
a) Of translator is more
b) Of line of sight is more
c) Having equal capacity
d) No relation such as
Answer: a)
No of T-state required for memory read or write operation-
a) 2
b) 3
c) 4
d) 6
Answer: b)
In data transfer operation which flag get affected-
a) 3140 flog.
b) carry flog
c) sign flog.
d) none
Answer: d)
The storage and retrieval of data on stacks should follow sequence-
a) last in first out
b) first in first out
c) random in random out
d) none
In flowchart which figure represents process like subroutine-
| | | |
While executing program microprocessor checks INTR line clearing-
a) each instruction
b) after interval of two instruction
c) after a subroutine
d) at the end of program.
Answer: a)
93. In which error check technique of data communication 2?s complement of all bytes of data is transmitted with data-
a) Even parity
b) odd parity
c) check scans
d) cyclic redundancy
Answer: a)
Program execution hierarchy decides which operator-
a) is most important
b) is used first
c) is fastest
d) operators on largest number
Answer: c)
(375)10 = (?-)8
a) 550
b) 557
c) 567
d) 577
Answer: c)
To obtain 2048 8 memory using 128 8 memory chip how many IC required-
a) 2
b) 4
c) 8
d) 16
Answer: d)
A Decimal no. 17 can be converted in binary, the binary no. will be.-
a) 10001
b) 01110
c)00111
d) 11100
Answer: a)
Is the Universal logic gate-
a) AND
b) OR
c) NAND
d) X-OR
Answer: c)
A monostable state in multivibrator means-
a) which returns itself to its single stable state
b) the state used only once in circuit
c) the state of circuit can not get changed
d) the state of circuit always changing
Answer: a)
For designing binary counter which flip flop is preferred -
a) T FF
b) SR FF
c) D FF
d) JKFF
Answer: c)
His handwriting was not ?? so I could not read his note ?
a) attractive
b) eligible
c) clear
d) legible
Answer: d)
They started to ?? people into the theatre only at six -
a) enter
b) admit
c) follow
d) accept
Answer: a)
I told him to buy things that are lasting (Give the appropriate synonym of the underlined word).
a) ending
b) ordinary
c) durable
d) cheap
Answer: c)
Give the word which is most opposite in meaning of the word ?evident?-
a) doubtful
b) unimportant
c) disagreed
d) understood
Answer: a)
I expressed by disagreement ?? him on that issue-
a) between
b) with
c) about
d) for
Answer: b)
?Sugarbowl? of the world is -
a) India
b) Cuba
c) Brazil
d) USA
Answer: b)
Palk strait separates-
a) India and Srilanka
b) India and Burma
c) Britain and France
d) Malaysia and Sumatra
Answer: a)
The minimum number of atoms in a molecule of an element are-
a) 1
b) 5
c) 2
d) 10
Tides in the sea are caused by-
a) Effect of sun
b) Effect of moon
c) combined effect of moon and sun
d) Gravitational, centrifugal and centripetal forces
Answer: c)
The Bar council of India decided to close over law colleges across the country for their failure to maintain minimum teaching standard) There number is
a) 140
b) 200
c) 150
d) 100
Answer: c)
Aswan Dam is located in-
a) Egypt
b) Libya
c) Sudan
d) Iran
Answer: a)
Ghana Birds sanctuary is in the state of -
a)Rajasthan
b)Madhya Pradesh
c)Uttar Pradesh
d)Maharashtra
Answer: a)
Dry ice is-
a) Frozen carbon monoxide
b) Frozen carbon dioxide
c) Frozen ammonia
d) None of these
Answer: b)
East flower river of India is -
a) Cauvery
b) sone
c) Narmada
d) Tapti
Answer: a)
The total length of the great wall of China is ?
a) 1,400 miles
b) 1,500 miles
c) 1,300 miles
d) 1,400 miles
Answer: a)
Deficiency of vitamin C may result in-
a) beriberi
b) night blindness
c) dermatitis
d) Scurvy
Answer: d)
Bharat Shah a film financer was granted bail by Supreme Court after a
period of ?
a) 11 months
b) 2 years
c) 18 months
d) 15 months
Answer: d)
Indian local time is based on-
a) 800 E longitude
b) E longitude
c) 1100 E longitude
d) 250 E longitude
Answer: Can you Answer this?
Which one is a good preservative of food?
a) Spirit
b) Formaldehyde
c) Sugar
Answer: b)